PackSD11: Phoenix SD11 flashlight + ARB-L18-2600 battery + ARE-X1 + charger

Head Diameter 34
Body Diameter 26
Length 138
Weight (in gr.) 132.5
Maximum distance of the light beam (in meters) 45
Lumens 1000 to 1399 lumens
Power 18650, CR123
Brightness levels 3
Strobe No
SOS No
White and Red colored lights
IPX8 IP Protection
Battery level indicator Yes

The Phoenix SD11 flashlight is primarily designed for underwater photography. The "R +" mode is the optimal combination of neutral white light and red light, which is ideal for underwater viewing, photography and video recording. This is because the red light is extraordinarily poor even having a lot of light. On the other hand with the neutral white LED and the homogeneous, wide and flooding light beam, the SD11 is suitable for lighting and photography on land or in water.

In addition to the 100 meter water resistant rating, it makes the flashlight perfect for the demands of deep diving. The magnetic rotating ring offers easy selection of different modes. It has a security system that warns the user of a low battery level. A flashlight clip is included as well as accessories to mount on most cameras and video cameras.

Load level indication system (for your safety)

It uses a neutral white led Cree XM-L2 U2 and a red led Cree XQE, with a lifespan of 50,000 hours

· Works with a 18650 rechargeable lithium-ion battery or with two CR123A lithium batteries

138mm Length × 26mm body diameter × 34mm head diameter

132.5 grams (excluding battery)

· Combined output of neutral white and red light (supplementary lighting ideal for underwater photography and video)

· 110 ° wide beam angle for even and smooth lighting effect

· Special clip for the flashlight and accessories suitable for photographing most sports and with DSLR cameras

· Magnetic rotating ring for one-handed operation

· Battery level check

· Flashlight design for safe diving

· Double layer body structure, corrosion resistant

· Back cover with a large buckle design for quick and comfortable removal

· The output is digitally regulated and maintains a constant brightness

· It has a reverse polarity protection to protect it from incorrect battery insertion

Made of premium-grade aeronautical grade aluminum with anodized hard anti-abrasive finish

Includes: SD11 flashlight, camera mount clip and accessory, special wrist strap for scuba diving, two spare O-ring gasket, instruction manual and warranty.

Additional Note:

3 modes (high neutral white light 1000 lumens, 500 lumens low) + white and red combined light 250 lumens)

Low charge alert system: If the flashlight is operating in red if it detects low level of charge it will turn white, if it is strong white it will go down to low intensity. It serves to alert the diver of the low load level.

The accessory for mounting on cameras works for flashlights of the following diameter: 23-26 mm

The magnetic mode change ring is a guarantee against water.

Load level check system:

If the light appears solid red, optimum charge level

If the red light flashes slowly medium load

If the red light flashes quickly: charge level below 30%

(only works with 18650 batteries)

ARB-L18-2600 battery

Ref. ARB-L18-2600 Rechargeable battery 18650 3.6 V 2.600 mAh
This battery is specially designed for high intensity Fenix ​​flashlights. The Fenix ​​18650 battery has great capacity, excellent performance, great reliability and a compact design.

Product specifications:

2600 mAh large battery capacity with exceptional performance
The battery has heat protection
Built to protect it from overcharging, or over discharge, with a protection circuit to ensure maximum battery performance
The circuit board has front and rear protections to make it more impact resistant
Compact design, suitable for high intensity flashlights
The contact point protruding on the negative pole makes it convenient for the installation of batteries in line
It has no memory effect, the auto download is insignificant
3.6 volts
Charging current: Recommended 2A A1, maximum
Weight: 49 g Size: 18.5 mm in diameter with a length of 68 mm
Warranty period: 12 months from the date of purchase
Are-X1 + charger

Description

The Fenix ​​ARE-X1 + charger, is a single-channel smart charger, is built for different sizes of rechargeable lithium-ion batteries, as well as Ni-MH and Ni-Cd batteries. In addition, the micro USB charging port offers versatile universality. During charging, the easy-to-use LCD clearly indicates the battery level and charging status. It also has a built-in multi-protection to guarantee cargo security.

features

Input: DC 5V / 1.0A, from external power supply

Output: 4.2V / 1.0A: 18650, 26650, 16340, 14500, 10440 (lithium ion)

1.5V / 1.0A: AA, AAA, C (Ni-MH / Ni-Cd)

Size: 113mm x 38mm x 29mm (Length x Width x Height)

Weight: 58 grams (excluding the charging cable)

· Operating temperature: -20 ℃ to 50 ℃

· Operating humidity: 5% to 90%

Storage temperature: -20 ℃ to 85 ℃